
Facade lettering
Your brand name above the entrance, on the fascia panel or straight onto the wall. The sign that your shop is, seen from the street — and our most common commission.
- 1–6 m wide
- Letter height 30–120 cm
- IP65 for permanent outdoor use
We design, manufacture and install neon signs at shopfront scale — 1 to 6 metres wide, for the fascia above your entrance or as the centrepiece of your dining room. Not a catalogue sign, but your lettering in your typeface.
First design draft within 48 hours — free of charge and without obligation.


Two colours, two lines, deliberately offset — 2.4 m wide, IP65, wall mounted on the shopfront fascia.
Book each service on its own or take the full package — from the idea to the finished sign on your wall.
We develop a neon design that fits your brand and is actually manufacturable.
Learn moreSize, substrate, mounting position, power supply — we settle the questions before they get expensive.
Learn moreYour sign built in the size, colour and specification you need — tested before it ships.
Learn moreProfessional on-site installation including alignment, mounting and electrical connection.
Learn moreEverything is made to order. There is no catalogue of fixed designs — your artwork is the template.

Your brand name above the entrance, on the fascia panel or straight onto the wall. The sign that your shop is, seen from the street — and our most common commission.

Your symbol as a glowing object on the facade or in the reception area. We vectorise it, check manufacturability and adjust line weights so the brand stays legible from twenty metres away.

Illustrations that carry a whole wall: botanical motifs, waves, abstract line work. Anything that translates into a continuous tube — indoors or on an exterior wall.

The centrepiece of a dining room, lobby or studio: large-format lettering above the banquette that defines the space and shows up in every guest photo.
Transparent and without surprises. You approve every step before we continue.
Send us your lettering or logo plus a photo of the facade — through the configurator or the contact form. A rough idea of the size is enough to start.
Within 48 hours you receive a to-scale mock-up on a photo of your own facade — so you see how the sign reads on your shop before committing — plus a binding fixed-price quote.
Revision rounds are included. Production only starts once design, dimensions and price are right.
Manufacturing in 10–15 working days, including quality control and a burn-in test before shipping.
Insured shipping across Europe. On request our team handles installation and the electrical connection on site.
Six typical situations — from the shopfront above the entrance to a logo on the wall.






Example visualisations for illustration — not yet completed customer projects.
Anywhere a brand needs to work in a physical space — indoors and out.
Your name above the entrance, lifting you out of the street after dark — plus the large lettering above the banquette inside.
Brand marks on the shopfront fascia. Passers-by see the brand, not just the display.
The sector with the strongest recognition pressure. A sign at shopfront scale pays for itself fastest here.
Entrance, bar and lobby in one consistent visual language — from the street sign to the lettering behind reception.
Facade lettering on the studio and large-format branding across the training floor.
The same sign at ten locations, the same quality, volume pricing. We produce the series in one run.
Do get comparison quotes — we would in your position. If another supplier offers the same scope for less, show us the quote and we undercut it by 5 %.
Modern LED neon flex looks like classic glass neon, but it is shatterproof, far more efficient and much easier to install.
Silicone-encased LED strips instead of glass tubes — safe in transit and safe to handle.
Around 80 % less power draw than glass neon. A 4 m facade sign runs on 60–140 watts — roughly €3 to €8 of electricity a month depending on operating hours.
Runs on 12 V or 24 V via a certified power supply — no high-voltage transformer, no control cabinet on the facade.
IP65 with a sealed backplate, outdoor power supply and sealed cable entry. Fixed via a mounting rail that spreads the load.
Optional dimmer, remote control or timer — RGB control available on request.
CE- and RoHS-compliant components, power supplies with EU plug.
This decides how a typeface is built: monoline scripts are filled by a single tube along the centreline. Heavy typefaces are wider than the tube, so it traces their contour instead.
Plan for roughly three to four weeks in total: 48 hours to the draft, then your approval, 10–15 working days of production and 5–8 working days of shipping. Express production is available for deadline-driven projects — tell us early so we can reserve capacity.
No. We produce from a single unit. Volume pricing kicks in from two signs, and from ten units we quote individually — for example for retail chains or franchise rollouts.
Yes, that is our standard case. A vector file (AI, EPS, SVG or PDF) is ideal. If you only have a photo or a low-resolution file, we redraw the logo for production — that step is included in the design fee.
Yes, that is our core business. In the outdoor build we use IP65 components, a sealed backplate, a weatherproof external power supply and a sealed cable entry. Fixing is done via a mounting rail so the load spreads across the facade and the sign still hangs straight after the tenth storm.
We give a five-year warranty on LED modules and power supplies. Power supplies, dimmers and mounting kits are kept in stock as spare parts. If a sign is damaged in transit we replace it without discussion — every shipment is fully insured.
That depends on the building regulations of your federal state and your municipality — the thresholds differ by state, size and location. We are not a planning consultancy and do not handle applications for you. What we do supply: all dimensions, weights and electrical data you need to enquire with your local authority. If you are unsure, clarify it before design approval.
You receive a proper invoice with VAT itemised. Standard terms are 50 % on order confirmation and 50 % before dispatch. For returning customers and public-sector clients we set up 14- or 30-day payment terms on request.
Send us your lettering or logo. You get a visualisation and a fixed price — free of charge and without obligation.
Rather talk it through? Pick a time in our calendar